Philips CSM1000/00 user manual Installation, Mount the subwoofer in car, Connect wires

EN

3 Installation

Note

•Follow all mounting and wiring instructions.

Mount the subwoofer in car

You can mount the subwoofer either under a seat or on the rear tray.

Note

•Make sure that the mounting location is safe for drilling and wiring, and it will not interfere with the mechanical and electrical components of the vehicle.

•For under-seat installation, make sure that it does not obstruct seat mobility.

1 Place the subwoofer on the location for installation.

2Mark the positions of the four screw holes.

3Drill the holes with driller of approximately 4mm in diameter.

4Mount the subwoofer with the supplied screws and brackets.

English

Connect wires

Caution

•Ensure that all loose leads are insulated with electrical tape.

1 Connect the subwoofer to your car audio by:

•(option 1) connect to bare speaker wires from car audio.

•(option 2) connect to the car audio directly via an RCA cable.

7