NOTE:
To benefit from I/O segregation and NPIV monitoring after creating a virtual port, configure zoning on the FCoE switch, and configure selective LUN presentation on the Fibre Channel or FCoE target array. For information about configuring the FCoE switch and target array, refer to the product documentation
7.Select Refresh from the Host
Verifying the Virtual Ports
Use QConvergeConsole GUI to verify that the vPort has been created:
1.Verify that the vPort is listed in the left pane of the QConvergeConsole window beneath the FCoE port selected when creating the virtual ports, as shown in the following example.
Figure 7-3. Verifying Additional Virtual Ports
|
