
Using QLogic BIOS and UEFI Utilities
You can update firmware without a first installing an operating system on the server. Such firmware upgrades are considered offline upgrades.
To update firmware on BIOS servers:
1.Boot the server into DOS using either a
2.Run the script update.bat.
3.Verify the firmware installation as described in “Determining the Installed Firmware Version” on page
To update firmware on UEFI servers:
1.Boot the server into the UEFI shell using an
2.Run the script update.nsh.
3.Verify the firmware installation as described in “Determining the Installed Firmware Version” on page
For information about using QLogic offline utilities, refer to Section 9.
Management Tool Installation
QLogic 8100 Series Adapters can be managed with QLogic utilities or with Linux utilities. The QLogic utilities are:
QConvergeConsole web management GUI, which is used to configure and manage QLogic Fibre Channel adapters, Intelligent Ethernet Adapters, and Converged Network Adapters within storage area networks (SANs).
QConvergeConsole CLI, which is used to configure and manage QLogic Fibre Channel adapters, Intelligent Ethernet Adapters, and Converged Network Adapters within SANs. The QConvergeConsole CLI also includes the networking (NIC) commands, previously supported in a separate networking CLI utility.
Linux