Q-Logic 8100 SERIES manual Offline Utilities, Brocade CEE/FCoE Switch/Blade Configuration

User’s Guide Converged Network Adapter

8100 Series Adapters

9	Offline Utilities
	Overview	9-1
	Fast!UTIL	9-2

Starting Fast!UTIL	9-2
Configuration Settings	9-4
Adapter Settings	9-4
Selectable Boot Settings	9-6
Restore Default Settings	9-8
Raw NVRAM Data	9-8
Advanced Adapter Settings	9-8
Scan Fibre Channel Devices	9-10
Fibre Disk Utility	9-11
Loopback Data Test	9-11
Select Host Adapter	9-11
Exit Fast!UTIL	9-12
EFICFG	9-12
FlasUTIL	9-13
Installing FlasUTIL	9-13
Using FlasUTIL	9-14
Installing the Multi-boot Image	9-15
EFIUTIL	9-16

AAdapter Port LEDs

BCisco Nexus 5000 Series Switch Configuration

	Enable FCoE on the Switch	B-2
	Create and Configure the VLAN	B-3
	Configure the Physical Ethernet Interface Switch Port	B-3
	Create and Configure a Virtual Fibre Channel Interface	B-4
	Verify that the Adapter Is Logged into the Switch	B-5
C	Brocade CEE/FCoE Switch/Blade Configuration
	Enable the Ethernet Switch Service	C-2
	Create and Configure FCoE VLAN	C-3
	Create and Configure CEE-MAP	C-4
	Configure LLDP/DCBX for FCoE	C-5
	Configure CEE Port	C-6
	Verify that the Adapter is Logged into the Switch	C-7

x FE0254601-00 A