Zenith Data Systems MT2000 manual SCU Configuration Settings, SCU Configurations

4-6

SCU Configuration Settings

Table 4-3 shows the recommended settings for the SCU and provides a place for you to record any changes you make to these settings. To view and/or change SCU Configuration settings, select Step 3 under the System Configuration Utility Menu.

Table 4-3. SCU Configurations

MAIN MENU	NORMAL SETTING	YOUR CONFIGURATION
System Board	Version 1.00
Diskette Drive*
	Diskette Controller On
Controller	Enabled
Floppy Drive 0	3 1/2 --1.44MB
Floppy Drive 1	No Floppy Drive
Parallel Port Group
Parallel Port*	378-37F, IRQ 7
Parallel Port Mode*	Bi-directional
Serial Port Group
Serial Port 1*	3F8-3FF, IRQ 4
Serial Port 2*	2F8-2F7, IRQ 3
Shadow Memory
Shadow ROM areas in RAM*	Press ENTER
C8000-CBFFF	ROM
CC000-CFFFF	ROM
D0000-D3FFF	ROM
D4000-D7FFF	ROM
D8000-DBFFF	ROM
DC000-DFFFF	ROM

* Press ENTER for Menu

Configuring Your System