Zenith Data Systems MT2000 manual Updating the Bios

4-32

Updating the BIOS

To update the system BIOS:

1.Insert an MS-DOS bootable diskette into Drive A and power up the system.

2.At the A:\ prompt, remove the MS-DOS diskette and insert the BIOS FLASH diskette.

3.Enter PHLASH and press ENTER.

4.Monitor the BIOS update process.

5.When the Update Process Complete screen appears, remove the diskette and power down the system.

6.Power up the system.

If the procedure fails, perform the following steps and then retry the Update BIOS procedure.

1.Turn off the system and remove the panels as described in the Upgrades and Options chapter.

2.Ensure the FLASH CODE jumper J6A is set to pins

1-2 to enable updates to the BIOS (see Figure 4-2).

3.Replace the panel and power up the system with the BIOS FLASH diskette inserted in Drive A

4.The recovery process, if required, is automatic.

Configuring Your System