5.Record the option board serial number in the equipment log.
6.Set any board jumpers or switches as described in the documentation that comes with the option board.
Note: Refer to the documentation accompanying the option board for information on whether the board is to be installed in a PCI or EISA expansion slot.
7.Refer to Table
8.Holding the board by its top edge or upper corners, firmly press the board into an expansion slot on the system board. The tapered foot of the option board retaining bracket must fit into the mating slot in the expansion slot frame (Figure
Figure 5-12. Installing an Option Board
Option board installation
A Expansion slot screw
B
A
B
