Using the BIOS Setup Utility
You access the BIOS Setup utility when you turn on or reboot your system. To run the BIOS Setup Utility, perform the following procedure:
1.
Press <F2> to enter SETUP
2.Press F2. The BIOS Setup Utility starts and the Main Menu is displayed. The menu bar at the top of the Main Menu lists the following selections:
Menu | Use |
|
|
Main | Use this menu for basic system configuration. |
|
|
Advanced | Use this menu for setting the Advanced Features |
| available on your system. |
|
|
Security | Use this menu to set User and Supervisor Passwords |
| and the Backup and |
|
|
Server | Use this menu for configuring Server Features. |
|
|
Exit | Exits the current menu. |
|
|
Use the arrow keys to select a menu or an item on a displayed menu. Press the value keys (listed in the table below) to cycle through the allowable values for the selected field. Use the Exit menu’s “Save Values” selection to save the current values on all the menus.
To display a submenu, position the cursor on a selection that has a submenu and press ENTER. Selections with submenus are preceded by an arrow
().
Configuring Your System
