Configuring the RAID Controller
The DACCF utility is included with the RAID controller. This configuration utility allows you to configure your disk array before installing your network operating system. The DAC960PDU RAID controller supports various versions of RAID technology (referred to as RAID levels). To use any RAID level, you must configure the RAID controller using the DACCF configuration utility prior to installing your Network Operating System. For an explanation of this utility, refer to the DACCF Utilities Installation Guide and User Manual that was shipped with the server. Chapter 2 of the manual
(Configuration Strategies) describes RAID technology and provides tips on making your array perform well in your specific application. Chapter 3 (Preparing the Array) covers array hardware preparation, configuration, and initialization. After completing the steps in chapter 3, you can install your Network Operating System.
If you want to be able to remotely (from a PC client) configure the array; increase array capacity online; or monitor statistics on disk and controller activity, you must install the Global Array Manager (GAM) option that was provided with your RAID subsystem. The GAM option includes diskettes and user documentation. Use of GAM is documented in the Global Array Manager 2 Server Installation Guide. Increasing array capacity is covered in the MORE User Guide. This user guide covers enhancements to both the Global Array manager and DACCF utilities software that implement online RAID expansion (MORE) technology.
System Cabling
