2-23
Removable Media Drive Bays
On the left side of the system above the diskette drive, three 5 1/4-inch half-height bays (see Figure 2-6) are designed for peripherals with removable media (diskette, CD-ROM, tape cartridge). Any two adjacent
51/4-inch bays can be converted to a single full-height bay. The 5 1/4-inch drives can be removed directly from the front of the chassis after the 5 1/4-inch plastic frame is removed. The bezel is retained by a thumb screw and snap features and is accessible when the left side panel and top panel are removed. Cosmetic filler panels and metal EMI shields are installed over all unused 5 1/4-inch bays.
On the left side of the system below the 5 1/4-inch removable media drive bays, two built-in 3 1/2-inch bays one of which contains a 3 1/2-inch diskette drive that supports both 720 KB and 1.44 MB media (see Figure 2-6).
Figure 2-6. Removable Media Drive Bays
Factory-installed CD-ROM reader plus two bays for removable media drives.
Factory-installed 3 1/2-inch diskette drive plus second bay for removable 3 1/2-inch drive.
(Exterior door shown open)
Note: The SCSI termination resistors must be installed in the last SCSI drive of the daisy chain cabling (top media bay). All other devices must have terminators removed.
Features
