Zenith Data Systems MT2000 manual System Top Cover, Removing top cover

5-8

A

4.At the back, remove two retaining screws from the top cover (see Figure 5-2).

5.Avoid bending the EMI fingers as you slide the cover back very slightly (to about a 1/2-inch or less.) Then pick the cover straight up from the chassis.

Figure 5-2. System Top Cover

Removing top cover

A Retaining screws (two at back)

To avoid damaging EMI fingers, do not slide the cover back much more than the 1/2-inch implied here.

Upgrades and Options