How to use the Jpeg Conversion Tool | Toshiba TDP-TW95, TDP-TW100

How to use the JPEG Conversion Tool (Continued)

■Making a presentation with converted JPEG files

(1)Copy the folder created by the JPEG Conversion Tool, or its contents, onto a USB memory.

(2)Use the step 1 in “Playing a slide show from a thumbnail list” p.57 to display a list of thumbnails.

(3)Follow the instructions in step 2 in “Playing a slide show from a thumbnail list” p.57 to find the thumbnail of the first slide, Slide001.jpg, and move the orange frame to it. (Select Slide001.jpg)

(4)Press the button on the remote control. An enlarged view of the first slide appears on the screen. This starts the presentation.

(5)To continue to the next slide, click on the remote control’s button. To go back to the previous slide, click on the button.

■Creating a screen capture and converting it into a JPEG file

Setting up the projector using a Web browser

■How to use the “Projector Configuration Tool”

The “Projector Configuration Tool” uses the Web server features of the projector to set up the projector using a wireless LAN USB adapter.

When using the “Projector Configuration Tool”, set up the wireless LAN connecting the projector and the computer.

1See “Checking the projector status” p.61 to display information on the screen and write down the IP address.

2Invoke Internet Explorer.

Internet Explorer Ver. 6.0 is recommended. Enable the Javascript functions. * Toshiba does not guarantee the operation for later versions.

3In the address bar, enter the IP address

“http://xxx.xxx.xxx.xxx/” recorded in step 1 above.

This function saves the current computer screen as a JPEG file.

(1)In the Conversion Method field, select Creating screen capture.

(2)In the File settings field, click on the Browse button for File name after conversion.

The Save As dialog box appears.

(3)In the Save As dialog box:

(a)Specify the location in which to save the converted file;

(b)Enter a file name of up to 8 characters in the File Name field; and

(c)Click on the Save button.

(4)(a) In the JPEG Conversion Tool window, click on the Conversion button.

(b)A confirmation message appears. Click Yes. The computer creates a screen capture, and converts it into a JPEG file in the specified location. When it is finished, a message appears to tell you that a “JPEG file has been created”.

(1)

(2)

(4)-(a)

(3)-(a)

(3)-(b) (3)-(c)

The Web browser will then display the following page.

Projector name	Operations
Projector name
Projector ID

Note 1: To prevent access from third parties, the projector is restricted to permit access only from the computer that has been set up for the TCP/IP to have the same network address as the projector.

(4)-(b)

Note

•The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024 ⋅ 768 pixels.

Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP address.

When the wireless LAN is set to use Ad hoc mode, use the WEB browser function in the Easy Connect menu of Wireless Utility.