Setting up the wireless LAN Continued, Select a Category

Setting up the wireless LAN (Continued)

■Setup using the Setting display (2)

●Projector settings (Be sure to read this subsection.)

Using the factory settings as-is may suffer security damage, so be sure to change the projector settings.

1. Press the MENU button twice The Setting display (2) is displayed.

* Appears only when Wireless/USB input is selected.

2. Select a Category

■Setting Wireless Utility

If you select Wireless Utility, the following items can be set.

Item			Description
Easy Connect [Yes	No] [Enter:	]
(USB memory)
Network settings	Mode: Ad hoc	Infrastructure

	Standards: IEEE802.11b		IEEE802.11g

	Channel: Select a number (1 to 11) using the			buttons.

Select a category by using .

The following four categories are available:

Wireless utility p.49 setup

Slide Show setup p.55

Displays the current settings of selected category.

Item shown in gray cannot be set with the currently set conditions of the projector.

SSID: Specify a desired character string (1 to 32 characters).
[	: Move left or right one character.]			[	to	: Set a character.]

Encryption: On		Off

Network authentication: Open			Shared

Key index: Select a desired number (1 to 4) set by					.

WEP key: Specify a desired character string.
(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
[	: Move left or right one character.]			[	to	: Set a character.]

DHCP: Use		Not use

Control setting	p.60
Status display	p.61

3.Make settings Press or to open the menu.

Item

These marks signify the items can be

selected from the list by using . After an item is selected, apply it by

pressing .

The figure shows a typical example. As the display may differ depending on the item, use the following pages as a reference.

While the video file transfer function of wireless utility is in use, the background image of the Setting display (2) does not appear.

4. Back	RETURN button
5. End	Press the MENU button or RETURN button.
	(The menu disappears 30 seconds after the last operation.)

IP address: Enter using the numeric keys of the remote control.

[

: Move left or right one character.]

[

: Set a character.]

Subnet mask: Enter using the numeric keys of the remote control.

[

: Move left or right one character.]

[

: Set a character.]

Gateway: Enter using the numeric keys of the remote control.

[

: Move left or right one character.]

[

: Set a character.]

Confirm: [OK]

[Cancel]

[Enter:

]

Setting

Reset all the network settings.

initialization

Confirm: [Yes]

[No]

[Enter:

]

Projector

Specify a desired character string (0 to 8 characters).

name

[

: Enter setting mode.]

[

: Select item.]

[

: Move left or right one

character.] [

: Set a character.]

Confirm: [OK]

[Cancel]

[Enter:

]

Remote

Specify whether to allow the remote control of the projector from a computer.

control

Allowed

Presentation

Forbidden

Allowed:

The projector always accepts remote commands from a computer.

Presentation:

Accepts only the remote commands from the computer whose screen is

currently displayed via the projector (Update automatically) using Wireless

Utility.

Forbidden:

Always ignores any remote commands from a computer.

WEB browser

Browser authentication: Switch on/off the password authentication for access to the

setting screen using the Projector Configuration Tool.

Off

Password: Enter the password used to access the setting screen when the Browser authentication is set to On. A character string (1 to 8 characters) can be specified as desired.

[: Move left or right one character.][to: Set a character.]