SCSISelect Configuration Settings

4-23

The following keys are active for all SCSISelect screens:

KEY	ACTION

Arrows	Up and down arrows move from one parameter to
	another within a screen.
ENTER	Displays options for a configurable parameter.
	Selects an option.
ESC	Moves back to previous screen or parameter or
	EXIT if at the Main menu.
F5	Switches between color and monochrome.
F6	Resets to host adapter defaults.

Table 4-7 shows the normal settings for the SCSISelect Utility and provides a place for you to record any changes you make to these settings.

Table 4-7. SCSISelect Setup Configurations

	RECOMMENDED SETTING	YOUR
OPTION	OR DISPLAY ONLY	CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID	7
SCSI Parity Checking	Enabled
Host Adapter SCSI Termination	Enabled
Additional Options
Boot Device Options	Press ENTER for menu
Boot Target ID	0 7
Boot LUN Number	0
SCSI Device Configuration	Press ENTER for menu
Initiate Sync Negotiation	Yes
Maximum Sync Transfer Rate	40.0 4
Enable Disconnection	Yes
Initiate Wide Negotiation	Yes
Send Start Unit Command	Yes 1
Include in BIOS Scan	Yes 1
Advanced Configuration Options	Press ENTER for menu.
Reset SCSI Bus at IC Initialization	Enabled

1No effect if BIOS is disabled.

2Do not remove media from a removable media drive if it is under BIOS control.

4Set to 40.0 for AIC7880 or 10.0 for AIC7860.

7Set to 0 for AIC7880 or 5 for AIC7860.

Configuring Your System