Zenith Data Systems MT2000 manual Figure A-1. Standard System Cable Configuration

A-3

Figure A-1. Standard System Cable Configuration

A— Device internal SCSI termination resistors B— Narrow SCSI devices in upper peripheral bays C— Narrow SCSI interface cable

D— Narrow SCSI connector (50 pin)

E— Internal SCSI termination resistors (not installed when internal narrow SCSI devices are used)

F— 3 1/2-inch diskette drive G— 2nd diskette drive (optional) H— Diskette interface cable I— Diskette drive connector

J— Ultra wide SCSI connector (68 pin) K— Ultra wide SCSI interface cable

System Cabling