Zenith Data Systems MT2000 manual System Feature Summary, Feature Description

2-4

System Feature Summary

The following provides a summary of the system
features:
Feature	Description
System board and	System is intended for use with a system board and
processor/memory board	processor/memory board based on Pentium Pro processor
	technology; from one to two processors and up to 1 GB of
	memory using 128 MB DIMMs.
Add-in board support	Rail and back panel slots support up to 8 add-in boards
	(three EISA, four PCI, and one shared PCI/EISA).
3 1/2-inch diskette drive	3 1/2 diskette drive is externally accessible.
Six locations for 3 1/2-inch	The hard disk drive bay can hold six 3 1/2-inch hot-
SCSI-2 hard drives	swappable ultra wide SCSI-2 hard drives. The bay is
	secured behind a lockable metal EMI door; drives can be
	swapped in or out of the system without powering it
	down, if a Redundant Array of Independent Disks (RAID)
	controller module is installed. The array of drives allows
	easy setup of optional RAID applications.
Hot swap-capable backplane	A hot swap-capable backplane is part of each 3 1/2-inch
	drive bay assembly for SCSI drives. The backplane is
	designed for wide ultra SCSI-2 devices that use the
	industry standard 80-pin Single Connector Attach (SCA)
	connector. The backplane consists of two rows of three
	drive connectors.
Three locations for removable	Three externally accessible 5 1/4-inch half-height bays
media drives	are available for diskette, CD-ROM, and/or tape drives.
Power supply	One or two 330 Watt autoranging power supplies are
	easily removed/installed for service. In a two-supply
	system, the second supply is redundant.
Hot swap-capable cooling	Each power supply has two integral cooling fans. Six
fans	more fans provide cooling for boards and drives.

Features