Zenith Data Systems MT2000 Installation Considerations, Option board connectors on system board

5-26

Figure 5-10. PCI and EISA Slot Locations

Option board connectors on system board

A System board

B Connectors for PCI option boards

C Connectors for shared PCI/EISA option board slot

D Connectors for EISA option boards

Installation Considerations

Newer adapters, designed for Plug-and-Play systems, are automatically configured by the system without any user intervention. Older ISA and EISA adapters must be manually configured as detailed below. Once the manual configuration is complete, the Plug-and-Play adapters are configured around the manually configured adapters without causing any resource conflicts.

■ISA Adapters - These adapters can be Plug-and- Play. ISA adapters that are not Plug-and-Play must be manually configured following the instructions supplied with the board. The configuration is defined to the system by creating the ISA configuration file when running the SCU. For details on running the SCU, refer to Chapter 4.

Upgrades and Options