Zenith Data Systems MT2000 manual Making Connections

3-3

Making Connections

Note: If your system normally operates without a video display or keyboard (for example, as a network server), you must install a video display and keyboard to configure the system. You may remove them after running the System Configuration Utility (SCU). For information on running the SCU, refer to Configuring Your System in Chapter 4 of this User’s Guide.

Refer to Figure 3-1 and connect your keyboard, monitor, and mouse. Connect any external peripheral devices such as a printer or modem by following the instructions included with these devices. To connect external SCSI cables, refer to Cabling in Appendix A of this User’s Guide.

Notice: Damage to the system may result if the keyboard cable is inserted or removed when power is applied to the system.

Caution: Inserting a telephone line connector into a LAN board RJ-45 port may result in personal injury and equipment damage.

Setup