Zenith Data Systems MT2000 manual Installing the Processor/Memory Board

5-18

Figure 5-6. Installing the Processor/Memory Board

3.Hold the processor/memory board (see Figure 5-6, B) by its edges and start to insert it into the slot guides.

4.Do not press in on the board yet! Ease board into the slot guides until it is just touching the connector on the system board.

Caution: Before pressing the board firmly into the system board connector, confirm visually that the board edge connectors are correctly oriented—not too low or high—at the system board connector.

5.Press the board carefully but firmly into the system board connector to seat the board.

Caution: Before applying power, do one more check. Make sure the board is completely seated in the system board connector before applying power. Incomplete insertion can result in damage to the system board and to the board you have installed.

Upgrades and Options