Zenith Data Systems MT2000 manual See Configuring Switch and Jumper Settings in Chapter

		2-11
A	AC input power	One at the top of the power supply cage that supplies AC
	connector	power for all the power supplies.
B	Power supplies (two	Possible configurations, installed from left most bay:
	shown)	1 supply (nonredundant)
		2 supplies (one redundant)
C	Security padlock loops	One on each side at the top rear of the chassis, one on the
		power supply cage, and one on each power supply module..
D	Keyboard	PS/2-compatible 6-pin mini-DIN connector.
E	Mouse	PS/2-compatible 6-pin mini-DIN connector.
F	—	Reserved
G	COM2	COM2 serial port 9-pin connector.
H	COM1	COM1 serial port 9-pin connector.
I	External-SCSI	Narrow-SCSI 50-pin connector
J	Function select	See Configuring Switch and Jumper Settings in Chapter 4
	switches	of this User’s Guide.
K	Dump button	See Configuring Switch and Jumper Settings in Chapter 4
		of this User’s Guide.
L	VGA	VGA monitor 15-pin connector.
M	Printer	LPT1 25-pin Centronics-compatible parallel port
		connector.
N	PCI slots	Four PCI add-in board slot locations.
O	Knockouts	Available to route SCSI signals to peripheral boxes.
P	PCI/EISA slot	One PCI or EISA add-in board slot location.
Q	Knockouts	Available to route SCSI signals to peripheral boxes.
R	EISA slots	Three EISA add-in board slot locations.
S	Power supply status	See Table 2-4 for status descriptions.
	lamps

Features