Table 4-7. SCSISelect Setup Configurations (Continued)
| RECOMMENDED SETTING | YOUR |
OPTION | OR DISPLAY ONLY | CONFIGURATION |
Host Adapter BIOS (Configuration Utility | Enabled.1 |
|
Reserves BIOS Space) |
|
|
|
|
|
Support Removable Disks | Boot Only1 |
|
Under BIOS as Fixed Disks 1, 2 |
|
|
Extended BIOS Translation for | Enabled1 |
|
DOS Drives > 1 GByte3 |
|
|
Display | Enabled1 |
|
Initialization |
|
|
Multiple LUN Support | Disabled1 |
|
BIOS Support for Bootable | Disabled1 6 |
|
BIOS Support for INT 13 Extensions | Enabled1 |
|
Support for Ultra SCSI Speed | Enabled1 5 |
|
1No effect if BIOS is disabled.
2Do not remove media from a removable media drive if it is under BIOS control.
3Set to Disable if NetWare 3.12 or 4.11 Network Operating System is installed.
5Set to Disabled for AIC7860 or Enabled for AIC7880.
6 Set to Enabled for AIC7860 or Disabled for AIC7880.
Exiting SCSISelect
To exit SCSISelect, press ESC until a message prompts you to exit (if you changed any settings, you are prompted to save the changes before you exit).
Configuring Your System
