Samsung Official Manual for Setting Up Anynet+ on LE40B551

Setting Up Anynet+

	Option		Description
		■ Anynet+ (HDMI-CEC)
Setup
		To use the Anynet+ Function, Anynet+ (HDMI-CEC)must
		be set to On.
		When the Anynet+ (HDMI-CEC)function is disabled, all
		the Anynet+ related operations are deactivated.
		■ Auto Turn Off
		Setting an Anynet+ Device to turn Off automatically when
		the TV is turned Off.
		•	The active source on the TV remote must be set
		•	to TV to use the Anynet+ function.
			If you set Auto Turn Off to Yes, connected
			external devices are also turned off when the
			TV is turned off. If an external device is still
			recording, it may or may not turn off.

Application	Anynet+ (HDMI-CEC)
	Media Play (USB)

Setup

Anynet+ (HDMI-CEC)	: On		▶
Auto Turn Off	: Yes
	UMove	EEnter	RReturn
	Setup
Anynet+ (HDMI-CEC)	: On
Auto Turn Off	: Yes		▶
	UMove	EEnter	RReturn

43

English Anynet+

Switching between Anynet+ Devices

1	Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-
	CEC).
2	Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton.
	■ Anynet+ devices connected to the TV are listed. If you cannot find a device
3	you want, press the red button to scan for devices.
	Press the ▲ or ▼ button to select to a particular device and press the ENTERE
	button. It is switched to the selected device.

■ Only when you set Anynet+ (HDMI-CEC)to On in the Application menu, the Device List menu appears.

■ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

■ The time required to scan for devices is determined by the number of connected devices.

■ When the device scan is complete, the number of devices found are not displayed.

■ Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the Red button to search for the connected device.

■ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

■Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+ (HDMI-CEC).

View TV

Device List

Recording: DVDR

DVDR MENU

DVDR INFO

Receiver: Off

Setup

UMove EEnter RReturn