Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. For added stability, install the
|
|
| To avoid the TV from falling: |
1 | Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the |
screws have been firmly installed onto the wall. | |
| ■ You may need additional material such as an anchor depending on the type of |
| wall. |
| ■ Since the necessary clamps, screws, and string are not supplied, please |
| purchase these additionally. |
2 | Remove the screws from the centre back of the TV, put the screws into the clamps, |
and then fasten the screws onto the TV again. | |
| ■ Screws may not be supplied with the product. In this case, please purchase the |
| screws of the following specifications. |
| ■ Screw Specifications: |
| For a 17 ~ 29 Inch LCD TV: M4 X L15 |
| For a 32 ~ 40 Inch LCD TV: M6 X L15 |
3 | Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong |
string and then tie the string tightly. | |
| ■ Install the TV near to the wall so that it does not fall backwards. |
| ■ It is safe to connect the string so that the clamps fixed on the wall are equal to or |
| lower than the clamps fixed on the TV. |
| ■ Untie the string before moving the TV. |
4 | Verify all connections are properly secured. Periodically check connections for any |
sign of fatigue for failure. If you have any doubt about the security of your connections, |
contact a professional installer.
English Getting Started
Wall
Wall
