Q-Logic 8100 SERIES manual Installing an FCoE Driver for Windows

3–Installation in a Windows Environment Installing Software

b.To install the driver, right click Fibre Channel Controller, and then click Update Driver Software... (Figure 3-25).

Figure 3-25. Installing an FCoE Driver for Windows 2008

6.If you are updating QLogic adapter drivers:

a.Click Storage controllers (for FCoE drivers). Find each port of the QLogic adapter FCoE function that is listed as QLogic FCoE Adapter under this section. Figure 3-26shows typical entries for a dual-port QLogic 8100 Series Adapter.

Figure 3-26. Typical QLogic 8100 Series Adapter Port Entry

b.To update the driver, right click QLogic FCoE Adapter, and then click Update Driver Software… (Figure 3-27).

Figure 3-27. Updating an FCoE Driver for Windows 2008

FE0254601-00 A 3-21