Delphi Essential Guide to Radio Reset and Management Features

16

Section 4

Auto-On

Once you have installed your Roady2 and the power has been turned on using the power button , you will discover your Roady2 has been factory- set to be turned off and back on again using the ignition key in your vehicle. To change this factory-set condition and always power your Roady2 on and off with the power button , select the “Auto-On” feature in the menu and then select “Off.”

Auto-Off

You can set your radio to automatically shut off 60, 120, or 180 minutes after it is turned on. This feature should be used if your vehicle continues to power the cigarette lighter/auxiliary power after you remove your key, so if you leave it on, Roady2 will shut down automatically after the time period you select and will not drain your battery. At home, this can be used as a “sleep” feature to turn Roady2 off automatically after a period of time.

Factory Default

This feature lets you restore your Roady2 to the same settings as when you purchased it. It will erase the presets, TuneSelect, memory, and stock ticker data stored and reset the other features to the configuration when you first purchased Roady2.

Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage.