12
Section 4
Menu
Press menu to enter the menu section of Roady2. Here, you can change each of
the following options using the Tuning Wheel | . Select the highlighted item by | |
pressing the Tuning Wheel | in. While in the menu section, menu acts as a “back” | |
button, allowing you to back out of existing sections. Following are the settings that can be changed:
FM Frequency (only available when FM modulator is turned on)
Roady2’s internal FM modulator can be used to send the audio to a nearby radio using an unused FM band. It is automatically turned on whenever the
audio jack 
is unplugged from the side of Roady2. This menu command allows you to use the Tuning Wheel 
to select the FM rebroadcast frequency.
First, make sure that your Roady2 is turned off. Then, find an open FM frequency on your car (or home/portable) radio by using its tuning knob or buttons to sample the following frequencies, selecting the one that does not have an existing FM radio station on it and has the least amount of interference from neighboring FM stations:
88.1 | 88.3 | 88.5 | 88.7 | 88.9 | 106.7 | 106.9 | 107.1 | 107.3 | 107.5 | 107.7 | 107.9 |
Next, turn on your Roady2, ensure that there are no connectors (such as the cassette tape adaptor connector) in the audio jack, select the “FM Frequency” option in the menu, and turn the Tuning Wheel 
to the desired frequency and press in to select that frequency.
If you hear static in the XM programming, repeat the steps in the previous two paragraphs using a different open FM frequency. Repeat this process for
Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage.
