The Driver Configuration Main Menu will be displayed. Do not redirect the output of the Driver Configuration protocol. Redirecting console output may cause failures.
For a more detailed description of the EFI commands used in this procedure, refer to the EFI shell documentation provided with your computer or the EFI project documentation at http://www.intel.com/technology/efi/index.htm.
For information about the EFICFG utility menus and selections, refer to Using the QLogic EFI Configuration and Diagnostic Protocols document in the software package.
FlasUTIL
The FlasUTIL utility is for offline QLogic 8100 Series Adapters installed in BIOS servers. The FlasUTIL utility performs the following tasks:
Read the
Write the
Verify the
Verify the NVRAM
NOTE:
FlasUTIL is a DOS utility that requires the server to boot in DOS, using either a DOS disk or a USB removable drive. Do not use the Microsoft Windows DOS interface to execute these utilities.
Some FlasUTIL features, such as the NVRAM options, are intended only for QLogic Technical Support and, therefore, are not documented in this guide.
Do not run this utility from a drive connected to the QLogic 8100 Series Adapter.
Installing FlasUTIL
To install the FlasUTIL utility:
1.Create a
2.Download the QLogic 8100 Series Adapter
3.Extract the
|
