Q-Logic 8100 SERIES manual QLogic 8100 Series Adapter Device Entries-Windows

3–Installation in a Windows Environment Installing Software

13.The Microsoft Windows Hardware Update Wizard proceeds to install the STOR Miniport driver for the QLogic adapter FCoE function.

14.When the installation is complete, click Finish to close the Hardware Update Wizard.

Installing the NIC Driver for Windows Server 2008

This procedure describes how to install the NIC driver for one adapter port on a Windows Server 2008 using Device Manager. For adapters with multiple ports, you must repeat this procedure for each port.

To install the NIC driver:

1.Install the adapter as described in “Installing Hardware” on page 3-4.

2.After the Microsoft Windows operating system has completed booting up, log on to the server as the Administrator.

3.Right-click on the My Computer icon on the desktop or in the Start menu, and then select Manage.

4.In the Server Management window, expand the Diagnostics entry in the left pane, and then select Device Manager.

5.Scroll down the list of hardware types. If you are installing the QLogic adapter drivers for the first time on this server, do the following; otherwise go to Step 6.

a.Click Other Devices to see a list of devices for which a driver is not installed on the server. Find each port of the QLogic adapter NIC function that is listed as Ethernet Controller under this section. Figure 3-18shows the typical entries for a dual-port QLogic 8100 Series Adapter.

Figure 3-18. QLogic 8100 Series Adapter Device Entries—Windows 2008

FE0254601-00 A 3-17