11.Configure of the team by assigning a dynamic or static IP address to the QLogic
The windows command, ipconfig /all, lists the newly created team but not the physical interfaces in the team. This is because only the logical team interface is visible to the operating system for all operations, while the QLogic teaming driver manages the physical interfaces.
Deleting a Team
NOTE:
Modifying or deleting a network team causes the network connection to be reset. Do not attempt to configure a team configuration on a production system.
To delete a team:
1.Start QConvergeConsole CLI by clicking its desktop icon.
2.In the main interactive menu, type 3, and then press ENTER to select Configure Team Menu.
3.In the Configure Teams Menu, type 4, and then press ENTER to select Delete Team to display a list of teams from which to choose.
4.Locate the team you want to delete in the list of configured teams. Type the corresponding number, and then press ENTER (Figure
Figure 6-15. Deleting a Team
5.After the system acknowledges that the team has been deleted, press ENTER to return to the Configure Teams Menu.
