Q-Logic 8100 SERIES manual Installing an NIC Driver-Windows

3–Installation in a Windows Environment Installing Software

b.To install the driver, right click Ethernet Controller, and then click Update Driver Software (Figure 3-19).

Figure 3-19. Installing an NIC Driver—Windows 2008

6.If you are updating QLogic adapter drivers:

a.Click Network Adapters (for NIC drivers). Find each port of the QLogic adapter NIC function that is listed as QLogic10Gb PCI Ethernet Adapter under this section. Figure 3-20shows typical entries for a dual-port QLogic 8100 Series Adapter.

Figure 3-20. Typical Ethernet Adapter Port Entries for Windows 2008

b.To update the driver, right click QLogic10Gb PCI Ethernet Adapter, and then click Update Driver Software (Figure 3-21).

Figure 3-21. Updating an NIC Driver for Windows 2008

3-18 FE0254601-00 A