Q-Logic 8100 SERIES manual QConvergeConsole-Update Entire Image

3–Installation in a Windows Environment Firmware Upgrades

3.Under Flash, click Update Entire Image (Figure 3-52).

Figure 3-49. QConvergeConsole—Update Entire Image

4.Click the Choose File button. The Open dialog box appears.

5.Navigate to and click on the file from which to update, then click Open. Make sure you select the correct file.

NOTE:

The Flash file must end with a .bin extension. Note that Flash files are unique to each adapter model.

6.If you select a file that is an unacceptable Flash file for the adapter, the unacceptable Flash data file message displays. Re-select a valid file and click OK. The Security Check dialog box appears.

7.In the Enter Password box, type the password, and then click OK.The page appears dimmed during the update.

8.When complete, the flash update complete message appears.

9.Select Refresh from the Host menu to refresh the configuration and version information.

10.Verify the firmware installation as described in “Determining the Installed Firmware Version” on page 3-34.

FE0254601-00 A 3-37