HP DL380 manual 4

QuickSpecs

HP ProLiant DL380 Generation 5

Standard Features

Upgradeability	Upgradeable to 2 processors (8 cores)
	Future upgradeable to Xeon® Series 5400/5300 Quad-Core processors (Please contact your
	regional sales support to determine quad core upgradeability. Some of the earlier shipping models
	may not support this upgrade). 5100 Dual-Core models are not upgradeable to the 5200 Dual-
	Core processors.
Memory Protection	Advanced ECC (multi-bit error protection), Online Spare, Mirroring
	4-way Interleaving
Memory	Type	PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1
		interleaving available (interleaving requires identical DIMMs)
	Standard	1 GB (2 x 512 MB)
	(Entry Models)
	Standard	2 GB (2 x 1 GB)
	(Base Models)
	Standard	4 GB (4 x 1 GB)
	(Performance Models)
	Maximum	32 GB (8 x 4 GB)
	NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at
	667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run
	at 533 MHz.
Network Controller	Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine,
	including support for Accelerated iSCSI through an optional Licensing Kit
Expansion Slots
Embedded Slots	Slot	Bus Speed*	Bus Number**	Device	Hot Plug	PCI Voltage
	Number			Number***
	1	x4 PCIe (x8	6	0	no	N/A
		connector)
	2	x4 PCIe	11	0	no	N/A
		(x8 connector)
	NOTE: Embedded slots support half-height low profile cards. For Base and Performance models,
	the integrated Smart Array P400 (SAS Controller) is installed in Slot 1.
PCIe Riser (Standard)	Slot	Bus Speed*	Bus Number**	Device	Hot Plug	PCI Voltage
	Number			Number***
	3	x4 PCIe	14	0	no	N/A
		(x8 connector)
	4	x8 PCIe	23	0	no	N/A
		(x16 connector)
	5	x8 PCIe	19	0	no	N/A
		(x16 connector)

NOTE: Riser slots support full-size PCIe/PCI-X cards. For Entry model, the standard Smart Array E200 Controller with 64MB Cache (SAS Controller) is installed in Slot 3.

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008 Page 4