HP DL380 800Watt, CE Mark Compliant, Optional Hot Plug AC Redundant Power Supply, Novell NetWare

QuickSpecs

HP ProLiant DL380 Generation 5

Standard Features

Power Supply	800Watt, CE Mark Compliant
	Optional Hot Plug AC Redundant Power Supply
System Fans	Fully redundant hot plug fans ship standard (N+1).
OS Support	Microsoft Windows Server 2000
	Microsoft Windows Server 2003
	Microsoft Windows Small Business Server 2003, R2
	Novell NetWare
	Red Hat Enterprise Linux
	SUSE Linux Enterprise Server
	SCO UnixWare, OpenServer
	VMware Virtualization Software
	Solaris 10 32/64-bit
	NOTE: For more complete and up-to-date information on how to buy server operating systems
	from HP please visit the OS product site at:
	http://h18004.www1.hp.com/products/servers/software/OEM.html.
	NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our
	OS Support Matrix at: http://www.hp.com/go/supportos.
	NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL380 G5,
	please see: http://h18023.www1.hp.com/support/files/server/us/index.html.
	NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
	BladeSystem Server Linux matrix:
	http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
	NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the
	VMware Server Support Matrix at:
	http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack Airflow	Rack 10000 series Cabinets
Requirements	The increasing power of new high-performance processor technology requires increased cooling
	efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
	maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
	CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
	adequate airflow and to prevent damage to the equipment:
	Front and rear doors: If your 42U server rack includes closing front and rear doors, you
	must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
	permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
	Side: The clearance between the installed rack component and the side panels of the rack
	must be a minimum of 2.75 inches (7 cm).
	CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
	This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
	cooling that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
	CD provided with the server, or to the server documentation located in the Support section at the
	following URL: www.hp.com/servers/dl380.

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008 Page 10