QuickSpecs

HP ProLiant DL380 Generation 5

Technical Specifications

System Unit

Dimensions (H x W x D) 3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)

 

 

(with bezel)

 

 

 

 

Weight (approximate)

Maximum

60 lb (27.22 kg)

 

 

 

(all hard drives, power

 

 

 

 

supply, and processor

 

 

 

 

installed)

 

 

 

 

Minimum

47.18 lb (20.41 kg)

 

 

 

(one hard drive, power

 

 

 

 

supply, and processor

 

 

 

 

installed)

 

 

 

Input Requirements

Rated Line Voltage

100 - 132 VAC,

 

 

(per power supply)

 

200 - 240 VAC

 

 

 

Rated Input Current

10A (at 100 VAC)

 

 

 

 

9A (at 120 VAC)

 

 

 

 

6.1A (at 200 VAC)

 

 

 

Rated Input Frequency

50 to 60 Hz

 

 

 

Rated Input Power

980W (at 100 VAC)

 

 

 

 

1035W (at 120 VAC)

 

 

 

 

1170W (at 240 VAC)

 

 

BTU Rating

Maximum

3350 BTU/hr (at 100 VAC)

 

 

 

 

3530 BTU/hr (at 120 VAC)

 

 

 

 

3990 BTU/hr (at 240 VAC)

 

 

Power Specifications

To review typical system power ratings use the Power Calculator which

 

 

 

is available via the online tool located at URL:

 

 

 

http://h30099.www3.hp.com/configurator/calc/Power%

 

 

 

20Calculator%20Catalog.xls

 

 

 

- Click on the system of interest. Example: DL380 G5

 

 

 

- Follow the instructions of the next screens.

 

 

Power Supply Output

Rated Steady-State

800 W (at 100 VAC)

 

 

Power

Power

850 W (at 120 VAC)

 

 

(per power supply)

 

1000W (qt 200-240 VAC)

 

 

 

Maximum Peak Power

800 W (at 100 VAC)

 

 

 

 

850 W (at 120 VAC)

 

 

 

 

1000W (at 200-240 VAC)

 

 

System Inlet

Operating

10° to 35°C (50° to 95°F) at sea level with an

 

 

Temperature

 

altitude derating of 1.0°C per every 305 m

 

 

 

 

(1.8°F per every 1000 ft) above sea level to a

 

 

 

 

maximum of 3050 m (10,000 ft), no direct

 

 

 

 

sustained sunlight. Maximum rate of change

 

 

 

 

is 10°C/hr (18°F/hr). The upper limit may be

 

 

 

 

limited by the type and number of options

 

 

 

 

installed.

 

 

 

 

System performance may be reduced if

 

 

 

 

operating with a fan fault or above 30°C

 

 

 

 

(86°F).

 

 

 

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of

 

 

 

 

change is 20°C/hr (36°F/hr).

 

 

Relative Humidity

Operating

10 to 90% relative humidity (Rh), 28°C

 

 

(non-condensing)

 

(82.4°F) maximum wet bulb temperature, non-

 

 

 

 

condensing.

 

 

 

Non-operating

5 to 95% relative humidity (Rh), 38.7°C

 

 

 

 

(101.7°F) maximum wet bulb temperature,

 

 

 

 

non-condensing.

 

 

Altitude

Operating

3050 m (10,000 ft). This value may be limited

 

 

 

 

by the type and number of options installed.

 

 

 

 

 

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008

Page 42