HP DL380 manual Smart Array E200 Disk Drive, SAS Connectors, Cache Memory Speed, Logical Volumes

QuickSpecs

HP ProLiant DL380 Generation 5

Technical Specifications

Smart Array E200	Disk Drive and	3G SAS (Serial Attached SCSI)
Controller	Enclosure Interface	1.5G SATA (Serial Advanced Technology Attachment)
	SAS Connectors	2 internal (SFF8484) x4 wide port connectors
	Cache Memory Speed	DDR1-266 MHz provides up to 4.2 GB/s maximum bandwidth.
	Server Interface	x8 2.5G PCIe provides 2GB/s maximum bandwidth.
	SAS Speed	x8 3G SAS provides 2.4GB/s maximum bandwidth.
	Cache Memory	40-bit 64MB cache or a 128MB battery backed cache: ECC protection,
		battery-backed, and transportable
	Logical Volumes	Up to 32 logical volumes
	Supported
	Maximum Volume	3TB (6 x 500 GB)
	Capacity
	Host Memory	64-bit, supporting greater than 4GB server memory space
	Addressing
	RAID Support	RAID 5 (Distributed Data Guarding)
		RAID 1, 1+0 (Striping & Mirroring)
		RAID 0 (Striping)
Two Embedded NC373i Network Interface		10Base-T/100Base-TX/1000Base-TX
Multifunction Server	Compatibility	IEEE 802.3 10Base-T
Adapters		IEEE 802.3ab 1000Base-T
		IEEE 802.3u 100Base-TX
	Data Transfer Method	PCI Express, four lanes (x4)
	Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-	100 Mb/s
		Duplex)
		100Base-TX (Full-	200 Mb/s
		Duplex)
		1000Base-TX (Half and	2000Mb/s
		Full-Duplex)
	Connector	Two RJ-45
	Cable Support	10Base-T	Categories 3, 4 or 5 UTP;
			up to 328 ft (100 m)
		100Base-TX	Category 5 or higher UTP;
			up to 328 ft (100 m)
		1000BaseTX	Category 5 or higher UTP;
			up to 328 ft (100 m)

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008 Page 44