Q-Logic 8100 SERIES manual Driver Configuration Main Menu

8–Configuring FCoE in a Linux Environment Boot-from-SAN

i.Select Show Translation, under Information, from the Driver Configuration Main Menu (Figure 8-15). This option displays the target and LUN information.

Main Menu

NVRAM Parameters

1.Edit Adapter Settings

2.Edit Advanced Settings

3.Edit Database

4.Edit Boot Settings Information

5.Show Database

6.Show Translation

7.Show NVRAM Buffer

8.Info

9.Help

Operation

10.Abandon

11.Write

12.Quit

Figure 8-15. Driver Configuration Main Menu

j.Confirm that the LUN you created in Step f appears in the list, and make note of the WWPN and LUN number. Press ENTER to return to the Main menu.

k.Select Edit Database, under NVRAM Parameters, from the Configuration Main menu.

l.Type the WWPN and LUN numbers of the primary and alternate boot device (entry ID 0).

m.Return to the Driver Configuration Main Menu, and select Edit Boot Settings under NVRAM Parameters.

8-38 FE0254601-00 A