FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool.
Installing or removing battery cartridge
•Always switch off the tool before insertion or removal of the battery cartridge.
001752 | • To remove the battery cartridge, pull out the set plate on | |
1 | the tool and grasp both sides of the cartridge while | |
withdrawing it from the tool. | ||
| ||
| • To insert the battery cartridge, align the tongue on the | |
| battery cartridge with the groove in the housing and slip | |
2 | it into place. Be sure to close the set plate fully before | |
using the tool. | ||
| ||
1. Battery cartridge | • Do not use force when inserting the battery cartridge. If | |
2. Set plate | the cartridge does not slide in easily, it is not being | |
| inserted correctly. |
Charging
|
|
|
|
|
|
|
| For DC9710 | |
002988 | • Plug the battery charger into your power source. | ||||||||
1 |
|
|
|
|
|
|
| • Insert the battery cartridge so that the plus and minus | |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| terminals on the battery cartridge are on the same sides | |
2 |
|
|
|
|
|
|
| as their respective markings on the battery charger. | |
|
|
|
|
|
| ||||
3 |
|
|
|
|
|
|
| Insert the cartridge fully into the port so that it rests on | |
|
|
|
|
|
|
| the charger port floor. | ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| • When the battery cartridge is inserted, the charging light | |
1. Battery cartridge | color will flash in red color and charging will begin. | ||||||||
2. Charging light | • When charging is completed, the charging light goes | ||||||||
3. Battery charger | |||||||||
out. The charging time is as follows: | |||||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| Battery 9100: approx. 60 minutes. | |
|
|
|
|
|
|
|
| • If you leave the battery cartridge in the charger after the | |
|
|
|
|
|
|
|
| charging cycle is complete, the charger will switch into | |
|
|
|
|
|
|
|
| its “trickle charge (maintenance charge)” mode. | |
|
|
|
|
|
|
|
| • After charging, remove the battery cartridge from the | |
|
|
|
|
|
|
|
| charger and unplug the charger from the power source. | |
NOTE:
• The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other
manufacturer’s batteries.
7
