Attended Mode Unattended Mode | HP FAX-700 manual

Table 3-4. Reception Modes on the HP FAX-900 and FAX-950

	Attended Mode			Unattended Mode
	(requires user action)

Receive	Normally receive	Normally receive		Normally receive	Normally receive
Mode	only voice	voice and fax calls.	only fax calls.		voice and fax calls
Conditions	calls.				and a telephone
					answering machine
					is connected.

Suggested	Telephone	Fax/Tel Auto		Fax mode	TAM Interface
Reception	mode	switch mode (Not			mode (TAM I/F)
Mode		used in France or			(Not used in
		Germany).			France).
	All calls must be	Fax calls are auto4	The fax machine		If the call is a fax
	manually an4	matically received.		picks up the line af4call, the fax ma4
	swered.			ter it detects 2 ringschine takes over
				and sends a fax	the call to receive
	If a fax call, you re4If the call is a		voicetone to the calling		the fax.
	ceive the fax after	call, the fax ma4		fax machine to start
	talking with the	chine will •beep".		the fax transaction	If the call is a voice
	sender, pressing	Pick up the tele4			call, the answering
	the fax •Start" but4	phone, press the			machine will auto4
	ton, and hanging	fax •Dial/Space"			matically receive
	up.	button, and start to			the call.
		talk.

Settings	Receive mode but4	Receive mode but4		Receive mode but4	Receive mode but4
	ton OFF, lamp is	ton lamp is OFF.		ton lamp is ON.	ton lamp is ON.
	OFF.
		Change fax param4			Change fax param4
		eter 15 to option 2:			eter 16 to option 2:
		Fax/Tel SW.			TAM I/F.

Unattended Modes

Fax mode receptionis one of the two unattended modes of receiving. In this mode, all incoming fax calls. For voice calls, the calling party will hear the fax signal from your machine, i fax to you. When a fax call is received, your fax machine answers and tries to detect the f detected, it sends a signal to the calling fax machine, indicating that it is ready to receive machine starts to automatically receive the fax.

To use fax mode reception, make sure the Receive mode button is set to ON (the lamp is lit) and you do document in the automatic document feeder of your fax machine.

Fax mode reception is the factory setting at shipment. If the parameter setting was chang mode reception, you need to set fax parameter 16 to option 1 (Fax). Press the buttons in the s

→