HP FAX-700 manual Monitor

Table 5-7. HP FAX-900 and FAX-950 Function Parameters (Continued)

No.	Parameter	Selections		Function
08	MONITOR	1	= Off	Selects Monitor ON/OFF for monitor-
	(Off)	2	= On	ing fax signals
09	DC LOOP	1	= Off (normal)	Can select a false, off-hook state for
	(Off)	2	= On (off-hook)	a back-to-back communication test
10	TX LEVEL	00 = 0 dBm		Selects the signal output level from 0
	(–9 dBm)	.		to –15 dBm in 1 dBm steps
		.
		15 = –15 dBM
11	RX LEVEL	1	= –43 dBm	Selects receiving sensitivity of –43,
	(–43 dBm)	2	= –38 dBm	–38, –33, or –48 dBm
		3	= –33 dBm
		4	= –48 dBm
12	DTMF LEVEL	00 = 0 dBm		Selects DTMF(touch tone) output lev-
	(–6 dBm)	.		el from 0 to –15 dBm in 1 dBm steps
		.
		15 = –15 dBm
13	G3 RX EQL	1	= 0 km	Selects cable equalizer in G3 recep-
	(7.2 km)	2	= 6 km	tion mode
		3	= 7.2 km
		4	= 13.2 km
14-16	Not Used
17	TX START	1	= 2400 bps	Selects transmission modem start
	(9600 bps)	2	= 4800 bps	speed
		3	= 7200 bps
		4	= 9600 bps
37	PROTOCOL	1	= Off (not displayed)	Selects whether or not the machine
	DISPLAY	2	= On (displayed)	displays modem speed during com-
	(Off)			munication

38Not Used

39Not Used in U.S.

40Not Used

41	PAUSE TIME	1	= 1 sec	Selects pause time from 1 to 10 se-
	(3 sec)	.		conds in one-second steps
		.
		10 = 10 sec
42	PHONE CALL (For	1	= Ignore (detect primary	Selects whether or not to detect the
	Hong Kong version	ringer)		primary ringer of a double ringer
	only)	2	= Answer (detect secondary
		ringer)
43	REDIAL INTERVAL	0	= no waiting	Selects redial interval from 0 to 15
	(3 min)	.		minutes in one-minute steps
		.
		15 = 15 minutes
44	REDIAL COUNT	0	= no redial	Selects redial count of 0 to 15 times
	(5)	.		in one-step intervals
		.

15 = 15 times

5￿38 Problem Resolution