HP FAX-700 Connecting to a Telephone, Connecting the HP FAX-900 and FAX-950 to the Telephone Line

Connecting the HP FAX-900 and FAX-950 to the Telephone Line

To connect the HP FAX-900 and HP FAX-950 to the telephonerformline, the following procedure:

Connect a telephone line from the phone wall jack to the LINE connector on the back of y Figure 2-39. An HP FAX-900 is illustrated in Figure 2-39, but the method of connection to the teleph same for the HP FAX-950.

FAX950-23

Figure 2￿39.￿ Connecting￿ the￿ HP￿ FAX￿900￿ or￿ FAX￿950￿ to￿ the￿ Telephone￿ Line

Connecting to a Telephone

Note For best performance, the telephone should be connected directly to the

Your fax machine is not designed for use in a phone system that has call wait extensions, caller ID, voice-mail, modems or roll-over lines. Use of a phone li extensions may cause transmission and/or reception problems if any of the e up during data transmission/reception. If problems occur, consider using a d for the fax machine or configuring the fax machine for distinctive ring det later in this chapter.

Your fax machine may have break-off tabs protecting the telephone and lin back of the machine. Carefully twist and pry the tabs out of the slots to a

Connecting a Telephone to the HP FAX-700 and FAX-750

To connect the HP FAX-700 or the FAX-750 to the telephperfone,rm the following steps:

1.Connect the fax machine to a telephone line. If necessary, refer to the procedure tit FAX-700 and FAX-750 to the Telephone Line”.

2.Plug one end of the phone cord into one of the connections at the rearTELof.Seethe fax ma Figure 2-40.

2￿28 Installation and Configuration