HP FAX-700 manual Changing Parameters in the HP FAX-950, Stamp

Changing Parameters in the HP FAX-950

To change or customize your fax, pressparametersthe buttons in the sequence shown and enter the information where requested.

Menu

→

Enter

2-digit Fax

→→

Parameter Number

Stop

→

7 → 4 →

Set

→ SelectOption →

Set

→

Set

→

Note If no activity is detected after 60 seconds, the display reverts back to the Da

Use the following table to select the fax parameter and associated options you want to cu option indicates the default setting.

Table 4-3. HP FAX-950 Parameter Options

2￿Digit	Parameter￿ Name
Parameter	Options￿ (choices)￿
Number	*￿ factory￿ set	Description
01	CONTRAST	Specifies￿ contrast￿ of￿ scanned￿ documents.
	1:￿ Normal￿ *	Use￿ if￿ original￿ has￿ contrast￿ of￿ normal￿ quality.
	2:￿ Darken	Use￿ if￿ original￿ is￿ unusually￿ light.
	3:￿ Lighten	Use￿ if￿ original￿ is￿ unusually￿ dark.
02	RESOLUTION	Specifies￿ resolution￿ of￿ scanned￿ documents.
	1:￿ Standard￿ *	Use￿ for￿ typical￿ text￿ documents.
	2:￿ Fine	Use￿ for￿ detailed￿ documents￿ and￿
	3:￿ 300￿ DPI	illustrations￿ ￿Fine￿ or￿ 300￿ DPI￿.
03	PHOTO	Specifies￿ print￿ speed￿ and￿ density.
	1:￿ Fast	To￿ print￿ fast,￿ use￿ less￿ ink.
	2:￿ Quality￿ *	To￿ print￿ at￿ highest￿ quality.
04	STAMP	Specifies￿ whether￿ or￿ not￿ the￿ verification￿ stamp￿ will￿ be￿ activated.
	1.￿ Off￿ *	Stamp￿ not￿ activated.
	2.￿ On	Stamp￿ activated.
05	MEMORY	Specifies￿ setting￿ of￿ the￿ home￿ ￿start￿￿ position￿ of￿ memory.
	1:￿ Off￿ *	Setting￿ not￿ enabled.
	2:￿ On	Setting￿ enabled.
06	DIALING￿ METHOD	Specifies￿ dialing￿ method.
	1:￿ Pulse	To￿ dial￿ using￿ pulse￿ signals.
	2:￿ Tone￿ *	To￿ dial￿ using￿ tone￿ signals.

Optimization 4￿37