Doc Jam

Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)

Service	Display	Parameter	Settings			Current	Standard
Parameter Indication		Description				Setting	Setting
Number

68	DOC JAM	This is the length of doc-01:		0.8	M*	1	1
	LENGTH	ument being scanned by	02:	2.0	M
		the scanner that will	03:	8.0	M
		cause the machine to in- 04: no limit
		dicate a document jam
69	DOC MISFEED Time elapse to detection		0...15 s			10	10
		of misfeed

70NOT USED

71NOT USED

72NOT USED

73NOT USED

74NOT USED

75	COPY COUNT	Running count of copies	n (count)	none
76	XMT COUNT	Running count of trans-	n (count)	none
		missions
77	RCV COUNT	Running count of recep-	n (count)	none
		tions

Response to Incoming Document With Errors on the HP FAX-700 and FAX-750

The following tables describe how the HP FAX-700 and FAX-750 determine how to respond to the tra document is received with errors. These tables apply only if the transmitter does not have Correction Mode).

The signals listed in the tables and their interpretation are as follows:

DMCF (Message Confirmation) – document received with good quality. Continue with n

DRTP (PIP if during voice request) – document received with marginal quality. Train next page. (RTP – retrain positive)

DRTN (Retrain Negative) – document received with unacceptable quality. Train at slo

DDCN (Disconnect) – Too many errors. Disconnect and send signal if the error condit after complete page is received

The followLinegError Tablegives the criterion used by the fax machine to determine which sign it detects a given number of errors on a page being received, and service parameter 46 is se

For example, if service parameter 47 is set to 3 and a page is received with 254 lines in error, then with the RTP signal.

Problem Resolution 527

HP FAX-700 manual Doc Jam

Models: FAX-700

Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)

LENGTH