HP FAX-700 manual Not Used Minimum on

Table 5-2. HP FAX-700 and FAX-750 Service Parameters (Continued)

Service	Display		Parameter	Settings	Current	Standard
Parameter Indication			Description		Setting	Setting
Number
17	NOT USED
18	MINIMUM ON-		Minimum time the ma-	0...15 SEC	5	5
	HOOK		chine goes on-hook be-
			tween sending consecu-
			tive faxes. If this time
			were too short the local
			CO might not see the
			“on-hook and not pro-
			duce a dial tone
19	RESPONSE		Duration of the wait for 0a...90 SEC		55	55
	WAIT		response from the re-
			mote station
20	PAUSE TIME	Duration of a pause		0...10 SEC	3	3
			created by pressing the
			Space button
21	BUSY TONE		Selects the number of	0...10 TIMES	2	2
	COUNT		busy tones detected be-
			fore recognition by the
			machine that the remote
			party is busy
22	BUSY TONE		This specifies whether	0:off* / 1:on	0	0
	DETECT		the machine will attempt
			to detect a busy signal
			after dialing. If “on”, the
			machine will go back on
			hook if it detects a busy
			signal
23	DIAL TONE		Selects whether or not 0:off* / 1:on		0	0
	DETECT		the fax machine will de-
			tect a dial tone
24	LIU TYPE		Selects the type of line01: US 02: not US*		2	2
			interface unit the fax ma-
			chine has
25	NOT USED
26	MIN MEM TO		Selects the minimum	0...99%	10	10
	RCV		percent memory the fax
			machine must have avail-
			able in order to receive a
			fax
27	SILENT		Selects the delay before0...99 SEC		20	20
	DETECT DLY		detecting machines that
			do not respond with a
			CNG signal (old fax ma-
			chines)
28	SILENT		This is the time from	0...99 SEC	60	60
	DETECT TO		completing dialing to
			when silent detect is
			switched off

5￿22 Problem Resolution