HP manual Auto Dialing on the HP FAX-700 and FAX-750

Scroll down

To clear (erase) a one-touchYounumbercan clear. (erase) a number from the current one-touch dire ing the buttons in the sequence shown. To reprogram an erased one-touch key, refer to the p Key Programming”, given earlier in this chapter.

	Menu						Set
		→	7	→	2	→
						Photo
				Scroll up
→	Scroll to access the
						Stamp
	first number to be

cleared

To clear additional numbers now,Set scroll to next number to be cleared

→→

and repeat to here until you have cleared all desired numbers

→

→

→

1 →

Clear

→

Stop

To change a one-touchIfnumberyou need. to change a one-touch number or station name, press th sequence shown.

Menu

→

7 →

2 →

Set

→

Photo

1 →

	Scroll up
	Scroll to access the first
→	number to be cleared or		→
		Stamp
	press the one–touch
	Scroll down
	number to be cleared
		Clear
	To clear			Enter
	Either clear the entry
→		Contrast	→	new num-	→
	or position the cursor
				ber
	to reenter informatiTonposition
				or station
	cursor over
				name
	digits to be Resolution
	replaced

To change additional numbers or stations now, return to the

→ scrolling step in this procedure→ and repeat to here for each num- ber or station to be changed

SetStop

→

Auto Dialing on the HP FAX-700 and FAX-750

You can define up to 50 auto dial numbers (01 through 50) using the numeric keypad. Each aut contain a phone number with a maximum of 36 digits, including pauses and spaces. Each auto contain a station name of up to 15 characters. The first 10 auto-dial numbers may be called u buttons orAutothe Dialbutton and 2-digit auto dial number. The remaining 40 auto-dial numbers (1

called using Autothe Dialbutton and 2-digit auto dial number.

Operation and Usage 3￿25