HP FAX-700 manual Avoiding Print Skew, Poor Print Quality

Wet Paper Path

Assembly

EK_32

Figure 5￿3.￿ Removing￿ the￿ Wet￿ Paper￿ Path￿ Assembly

4.Remove the jammed documentfrontmofthe machineNOT. Doopen the top cover (document feed assembly) to remove the document.

5.Pull the remaining paper from around the paper feed rollers.

6.Reinstall the wet paper path assembly.

7.Close the back cover.

Avoiding Print Skew

Print skew occurs when the movement of paper in the printer paper path is not square to th result is inconsistent print margins along the paper’s edge. Keep in mind the following infor print skew:

DBefore assuming the fax machine has a print skew problem, ensure that the other loaded paper. If the other station is the transmitter of the document, ensure tha properly loaded on the ADF and fed through the machine correctly

DEnsure that paper is properly loaded in your machine and that both corners of t contact with the body of the fax machine

DA skewed output printed on an HP FAX-700 or FAX-750 may be caused by document skew at scanner on the transmitting fax machine

DSome print skew is normal. Assume that there is a problem only if the fax machine omitting data

ThePrint Skew Specificationfor the printer paper
0path.006mmisper mm on 95% of all pages printed.

Paper must be loaded properly to avoid print skew. To ensure that paper is loaded properly scribed in chapter 2 of this guide.

Poor Print Quality

This section describes possible causes for the following print quality problems:

DFaint print

DFuzzy print

DInconsistent print quality

5￿30 Problem Resolution