HP FAX-700 manual Setting the Paper Size on the HP FAX-900 and FAX-950

Setting the Paper Size on the HP FAX-900 and FAX-950

Your HP Fax 900 is factory set for receiving documents using the standard paper size of the c when ordered. In the U.S. A., it is set for receiving letter - 8 1/2 in. x 11 inch documents. Where the normally used, it is set for receiving A4 size documents.

If you want to configure to receive U.S. legal (8 1/2 in. x 14 in.) or change to receive letter (8 1/2 in. x mm x 297 mm) size documents, you will need to configure fax parameter 23 to the desired size.

To configure the received document, presspaperthesizebuttons in the sequence shown and enter th information where requested.

Menu

2

Set

7

3

Stop

4

Set

Set

1.A4

2.Letter

3.Legal

Switching the Verification Stamp ON (HP FAX-950)

Note HP fax machines FAX-700, FAX-750, and FAX-900 do not have a verification stamp capabi

The verification stamp is a small￿ thatmaprkints at the bottom of each successfully transmitte FAX-950 comes from the factory with the verification stamp switched OFF. The FAX-950 can be

Stamp￿

switched ON by pressing the

button . The lamp next to the button is lit when the stamp fe

After the document is sent, the fax machine automatically returns the stamp setting to it

To permanently switch the verificationchangestampfaxON,parameter 04 to Option 2 using the following dure:

MenuPRS

7

Set

Type the numbers

04

GHISet/Volume–

4

SetStop

Type the

number

2

Note	Normally the fax machine does not stamp originals as they are stored in mem
	mission, for example). To switch the verification stamp ON for stored document
	set fax parameter 28 (MEMORY STORED STAMP) to Option 2.

2￿46 Installation and Configuration