HP manual Test Mode 09 Memory Clear on the HP FAX-700 and FAX-750

DSRAM Test – When this test is successfully completed, the following messages will ap message window, and the fax machine will return to the service menu level:

Doing Self Test

SRAM Test

O K

If a self test is unsuccessful, the letters NG will replace the letters OK in the above display

Test Mode 04 (Remote Diagnostics) on the HP FAX-700 and FAX-750

The remote diagnostic tests were described beginning on page 5-54.

Test Mode 05 (Function Parameters) on the HP FAX-700 and FAX-750

Press the Enter button when “05: Function Parameters” is in the message window. This action m to the function parameters test level. Use the up or down arrow buttons to browse throu Details of how to list the current settings of the function parameters and how to modify t chapter.

Test Mode 06 (Calibration Tests) on the HP FAX-700 and FAX-750

When these tests are implemented it is recommended that only central repair facilities ac

Test Mode 07 (Agency Compliance) on the HP FAX-700 and FAX-750

It is not recommended that this mode be accessed.

Test Mode 08 (Scanner Test Mode) on the HP FAX-700 and FAX-750

When these tests are implemented it is recommended that only central repair facilities ac

Test Mode 09 (Memory Clear) on the HP FAX-700 and FAX-750

It is not recommended that this mode be accessed.

Test Mode 10 (PC Inter Face) on the HP FAX-700 and FAX-750

This mode is not implemented.

Test Mode 11 (Service Default) on the HP FAX-700 and FAX-750

It is recommended that only central repair facilitiesAuto accessdial numbersthis modewill. be erased.

Test Mode 12 (Service Report) on the HP FAX-700 and FAX-750

This mode is used to list the current and standard settings of the service parameters and

Problem Resolution 5￿71