HP FAX-700 manual Replacing the HP FAX-900 and FAX-950 Paper Separator Pad

3.Locate the paper separator assembly. See Figure 2-31.

Paper Separator Assembly (C3530-62913)

Notch

750_11

Figure 2￿31.￿ Removing￿ the￿ Paper￿ Separator￿ Assembly

4.Remove the paper separator assembly by prying it out at the notch using your fingers, driver.

5.Install the new paper separator assembly.

Caution	The fax machine will not operate properly unless both corners of the ADF ar
	body of the machine as described in step 6.

6.Close the ADF door firmly ensuring that both rear corners of the ADF are snugly again machine.

7.Switch ON ( I) the fax machine, allow it to run through its self test, and copy a docume machine is operating properly.

Replacing the HP FAX-900 and FAX-950 Paper Separator Pad

The paper separator helps to prevent multiple sheet feed by presenting a small amount of f move through the automatic document feed mechanism. The paper separator pad is the part tacts the pages.

If your fax machine has been heavily used throughout its life and adjustment of the pressu in chapter 5 does not rectify a multiple sheet feed problem, you may need to replace the pap your local HP authorized fax dealer to order.

2￿22 Installation and Configuration