HP manual Receiving a Document on the HP FAX-700 or FAX-750

your fax machine reverts to the previous settings. To set new default values for the setting parameters 01, 02 and 03. Fax parameters are presented in chapter 4 of this guide.

To Set Transmission Resolution on the HP FAX-900 anduseFAX-the950, buttons described below for temp ly setting transmission print quality for the current document being sent.

Darken

Normal

Lighten

Darken

Normal

Lighten

Darken

Normal

Lighten

Contrast

If the original has light print quality, press the button until the darken lamp is lit

Contrast

	Standard setting for most documents. Press
	the button until the normal lamp is lit
Contrast	If the original has dark print quality, press
	the button until the lighten lamp is lit
Photo	Select when your document includes
	photographs or illustrations. Press the button
	until the photo lamp is lit

Standard Fine

Standard Fine

300 DPI

Resolution

Normal setting for most documents. Press the button until the standard lamp is lit

Resolution

For detailed documents, you may need high- er resolution. Press the button until the fine

or 300 DPI lamp is lit

Receiving a Document

Receiving a Document on the HP FAX-700 or FAX-750

You may set your HP FAX-700 for one of several receiving modes depending on your needs and eq the FAX machine. Procedures for setting receiving modes are described in chapter 2 under t Incoming Calls on the HP FAX-700 and FAX-750.

Note	When shipped from the factory, your HP FAX-700 is factory-set for automatic fa
	mode to answer all calls as fax calls. If you need to set your fax machine
	and voice calls, refer to the shared reception mode procedures in this sect

Attended/Unattended Modes on the HP FAX-700 and FAX-750

Attended Modes

There are two attended modes of reception. They are Answer Manually (with or without Remo Fax/Phone. In the Answer Manually mode, your fax machine will not answer calls. Someone m

3￿34 Operation and Usage