EK_12

Figure 3"6.￿ Loading￿ a￿ Document￿ into￿ the￿ HP￿ FAX"700

Slide the document OUT tray forward until it stops. The tray will catch the pages of the d machine after transmission.

Document￿ OUT￿ Tray

EK_7

Figure 3"7.￿ ￿ Sliding￿ the￿ Document￿ OUT￿ Tray￿ Forward

Adjust the ADF document guides to center the document in the ADF. See step 2 of Figure 3-6.

After loading the document, use one of the dialing methods described in this chapter to dia the receiving station where the document is to be sent.

Loading a Document into the HP FAX-900 and FAX-950

To load a document into the fax machine forloadtransmission,your document printed sideintofacingthedown automatic document feeder. The automatic document feeder will hold up to twenty page paper weight is used). If more than twenty pages are to be sent, place additional pages on to ment pages are fed through the machine. Make sure the document is free of paper clips and

Load the document and adjust the top cover document guides to fit the document. The HP FAX-9 the next paragraph, but the location of the document guides and the document position do

The fax machine will display that the document is set and generate a short beep sound, indi properly set into the automatic document feed mechanism.

Operation and Usage 3￿17

Page 89
Image 89
HP FAX-700 manual Loading a Document into the HP FAX-900 and FAX-950, Loading a Document into the HP FAX700